✅ Very long radio range
✅ IP 65 resistant enclosure for outdoor environments
✅ 2 PT1000 contact probes for remote measurements from -200°C to + 250°C
✅ Up to 15 years autonomy
✅ Quick and easy to install
✅ Replaceable battery
✅ Compact Design
This Enless Wireless LoRa / LoRaWAN IP65 transmitter with two external temperature contact probes allows you to measure temperatures (°C data) in a remote manner, on contact with surfaces.
The robustness of our transmitter – IP 65 housing – and its high environmental tolerance (probe temperature range -200°C / +250°C) allow it to withstand any type of “outdoor” environment, sometimes under extreme conditions.
Thanks to its two 2.0m probes, this temperature transmitter is especially suitable for applications such as monitoring of temperatures on inlet/outlet fluid circuits of all types and, in particular, continuous observation of sanitary hot water networks for preventing the health risk of legionella. It is also often used for temperature monitoring in cold rooms, or in agricultural environments.
This product is LoRa/ LoRaWAN compatible. It allows you to build an operated or private network. In LoRaWAN public mode, high-precision °C data is retrieved through the transmitter and sent to the LoRa network operator cloud at a flexible frequency. In LoRa Enless Wireless private mode, the data is transmitted over the radio to our Modbus receiver, which is usually connected to a gateway. In LoRaWAN’s private mode, the temperature data flows directly from our transmitter to the gateway.
High and low temperature thresholds can be viewed via the supervision system in place which also allows the configuration of alerts.
This product incorporates high-performance D-type battery and gives the Enless transmitter a very high autonomy of up to 15 years.
Technical Specifications
Dimensions |
L 118 x H 79 x W 43 mm |
Cable lenght |
2.0m |
Enclosure and IP rating |
ABS IP 65 |
Power supply |
Replaceable D 3.6 V Lithium battery - Low battery alert |
Battery autonomy / Periodicity |
5 years battery life with 5mn periodicity / Configurable periodicity |
Configuration / Installation |
Radio |
Type of sensors |
Contact probes 2 wires PT 1000 |
Contact probes working temperature |
- 200°C / +250°C |
Sensors accuracy |
+/- 0,5°C |
Sensors resolution |
0,01°C |
LEDs |
3 LEDs |
Certification |
CE |
In this section you can find datasheets, product manuals and other relevant product information.
Product Datasheets