The HAUG charging generators Tristat TR 15 / TR 25 are high-voltage generators developed specifically for the supply of HAUG charging triodes (types ALT, ALM and ANT). The charging triode is placed at a distance of approx. 10–20 mm above the material to be charged, directly opposite the counter-eletrode. The earthed counter-electrode must be in contact with the material to be charged.
In order to achieve a continuous, operationally reliable “adhesion” of the two materials, it is important to discharge the materials to be pinned to each other before charging using a suitable HAUG ionization system.
Special features and advantages
The charging generators Tristat TR 15 and TR 25 supply an adjustable high-voltage of approx. 22 kVDC.
The units are available in either positive or negative polarity. In case of the TR 25 ,the voltage set is displayed on the integrated measuring instrument. The Tristat TR 15 / TR 25 charging generators can be pulsed using an external control.
Suitable charging triodes
HAUG charging triodes (types ALT, ALM, ANT) are characterized by a very homogenous field at the charging pins. As a result of the special geometric design of the charging triode, spark-overs to the counter-electrode are impossible. The charging triode can therefore be mounted at a distance of as little as approx. 10 mm from the material to be charged. The charging triode provides a very high charge even at low voltages and thus ensures very good adhesion.
Due to their simple design using magnetic clamps, worn charging pins can easily be exchanged. The charging triode is connected using a shielded high-voltage cable.
In deze sectie kan u productfiches, technische fiches en handleidingen terugvinden.
Product Datasheets
HAUG Tristat TR High Voltage Charging Generator