CHARGING GENERATOR AG-60

The ccharging generator AG 60 is a high-voltage generator which is used in combination with HAUG charging electrodes and a suitable counter-electrode. The charging electrode must be attached at a distance of 10–20 mm above the material to be charged, exactly opposite the counter-electrode.

Where a grounded counter-electrode is used, this counter-electrode must make contact with the material to be charged. In order to achieve a continuous, controlled charge, we strongly recommend that before charging the materials to be fixed to one another be discharged using a suitable HAUG ionization system.

HAUG-Charging systems

HAUG charging systems are designed to apply electrostatic charges without physical contact. These systems can be used for any application where different materials are to be pinned together electrostatically. At least, one of these materials must be non-conductive. The electrostatic pinning serves to enhance subsequent processes, such as film/foil overlapping in packaging machines.

Special features and advantages

The charging generator AG 60 generates an adjustable high voltage of up to 40 kVDC. The unit is available with positive and negative polarity. The voltage and the actual current are indicated on the integrated measuring instruments. The high voltage and the current threshold can be set using two separate potentiometers. If the actual current exceeds the set value, an error message is triggered and the high voltage is switched off. The charging section of the charging generator AG 60 can be pulsed externally. The discharging section allows a signaling device to be controlled using the integrated signaling socket.