The AG 30 charging generator is a high-voltage unit that is used together with HAUG charging electrodes and a suitable counter-electrode. The charging electrode must be mounted at 10 to 30 mm above the material to be charged, exactly opposite the counter-electrode. When an earthed counter-electrode is used, it must be in contact with the material to be charged.
In order to obtain a constant and reliable charging, we strongly recommend that the materials, which are to be pinned together, be neutralized by means of an appropriate HAUG ionizing system before the charging process.
HAUG-Charging systems
HAUG charging systems are designed to apply electrostatic charges without physical contact. These systems can be used for any application where different materials are to be pinned together electrostatically. At least, one of these materials must be non-conductive. The electrostatic pinning serves to enhance subsequent processes, such as film/foil overlapping in packaging machines.
Special features and advantages
The AG 30 charging generator generates an adjustable high voltage of 40 kVDC. The device is available with either positive or negative polarity. Integrated measuring instruments show the voltage and the actual flowing current. High voltage and current threshold can be set with two different potentiometers. In the event that the flowing current exceeds the pre-set limit, an error signal is receivend and the high voltage is switched off.
The AG 30 charging generator can be set up for intermittent service by means of an external control.
An external signalling unit can be activated through the integrated signal connection.
Dans cette section vous pouvez trouver les fiches de produits, les fiches techniques et les manuels d’utilisation.
Product Datasheets